inLab SW 22 CAD and CAM applications offer a harmonized new user interface, additional design options and extended connectivity to CEREC Primemill. With the installation of inLab CAM SW 22.0, the new inLab CAM service is available. The database provides central management and storage of production data.
inLab MC X5 is a universal 5-axis production unit for wet and dry production of blocks and disks. It was designed to meet dental requirements in labs and focus on economic and effective production processes.
You benefit from a wide range of materials and can select from the high-quality materials of Dentsply Sirona and its CAD/CAM material partners for which the production processes of inLab MC X5 are optimized.
inLab MC X5 can be used for dry or wet production depending on the material and indication. More than thirty years of experience in the wet processing of glass ceramics make this the ultimate professional machine for the wet grinding of fully contoured restorations from final-strength monolithic materials. Alternating between wet and dry production, e.g., from glass ceramics to zirconia, is fast and easy.
The application range for inLab MC X5 enables dental labs to make productive use of their equipment. Processable disc height and setting angles offer flexibility for manufacturing implant restorations with heavily diverging screw channels or abnormally shaped stumps.
It is the perfect complement to the inLab components inEos X5 and inLab software but can also be used to process other STL restoration data, including implant-supported restorations with screw access channels. Having its own CAM module, the unit can be connected flexibly to other CAD systems.
For efficient material use and optimal preparation, the inLab CAM software positions the restoration in the workpiece according to your specifications. This takes previously positioned or prepared objects into account. Users can make adjustments without restrictions in the individual arrangement – for maximum flexibility and according to individual demands.
The inLab SW 22 CAD and CAM applications offer an extended connectivity to CEREC Primemill. The design and manufacturing workflow for CEREC Guide 3 surgical guide has been streamlined and the implant supported restoration design for DS PrimeTaper implant system is included. With the installation of inLab CAM SW 22.0, the new inLab CAM service is available. The database provides central management and storage of production data for Dentsply Sirona production units connected in the local network. This allows for an improved data that’s always up-to-date and higher security during data processing.
Please find below the most recent Software and document versions.
Contains additions/modifications to the following materials: Dentsply Sirona: CEREC Zirconia +, CEREC MTL Zirconia, CEREC Tessera (available worldwide) --- Shofu: SHOFU DISK ZR Lucent Supra, Shofu BLOCK HC SUPERHARD ---GC: CERASMART Prime. Additional PreFace abutments by the following companies can be selected: Dentsply Sirona, MIS, Medentika, Osstem, Straumann. Not all materials may be available in every country.
This document describes changes and improvements compared to the previous versions, inLab CAD SW 19.2 and inLab CAM SW 19.1.
Production of titanium abutments with inLab MC X5
Discs and tools for inLab MC X5
| General | inLab MC X5 |
|---|---|
| Width | 590 mm |
| Height | 810 mm |
| Depth | 580 mm |
| Weight | 87 kg |
| Required compressed air pressure |
min. 7bar |
| Required compressed air quality |
min. 50 l/min1 |
| Noise level |
<63dba |
| Kinematics |
|
| Axes | 5 |
| Angle of incidence for A axis |
360° |
| Angle of incidence for B axis |
+/-30° |
| Material Types |
|
| Zirconium oxide |
x |
| PMMA | x |
| Wax | x |
| Composite |
x |
| Hybrid ceramics |
x |
| Glass ceramics (with wet option) |
x |
| Lithium disilicate ceramics (with wet option) |
x |
| CoCr sintered |
x |
| Titan Preforms |
x |
| Material Forms |
|
| Blocks |
40 x 19 x 12 mm |
| Max number of blocks per process |
8 |
| Discs (Form) |
98/98,5mm with collar |
| Discs (Height) |
up to 35mm |
| Material openness |
Yes |
| Tool Management |
|
| Automatic tool changing |
Yes |
| Max number of tools per process |
6 |
| Changeable tool magazine controlled in SW |
Yes |
| Indications (inLab CAD)2 |
|
| Veneers | x |
| Inlays | x |
| Onlays | x |
| Crowns | x |
| Copings | x |
| Bridge frameworks | x |
| Bridges | x |
| Full-jaw bridges | x |
| Telescopes | x |
| Attachments | x |
| Abutments, milled from meso blocks | x |
| Abutments, milled from disks | x |
| Implant bridges | x |
| Bars | x |
| Splints | x |
| Surgical guide (single) |
x |
| Surgical guide (mulitple) |
x |
| Models | – |
Contact us for more information about products and solutions for the Dental Laboratory!
