Proven patient positioning
Only 2 light localizers are required for ideal positioning in the sharp slice. The motorized forehead and temple supports fixate the patient's head and prevent motion blurring.
The sound 2D x-ray unit providing a smooth entrance into the world of digital imaging. Thanks to CsI sensor technology and its easy to use interface, you are ensured reliable diagnostics every time. The cephalometric option also makes the Orthophos E a reliable partner for orthodontics. Enrich your practice with a wide range of services that are only possible with digital imaging.
The Orthophos E is the go-to solution for general dentists and orthodontists. Diagnostic accuracy is made possible by the many advantages you get when choosing digital imaging.
Thanks to the 2D-CsI sensor and reliable image quality
With motorized temple and forehead support, automatic temple width measurement, light localizers and sturdy handles
A left ceph arm left can be ordered or retrofitted at any time
For basic diagnostics in 2D
With the MultiPad control panel
Only 2 light localizers are required for ideal positioning in the sharp slice. The motorized forehead and temple supports fixate the patient's head and prevent motion blurring.
Orthophos E offers the capability to install a cephalometric arm at any time. And to be sure it fits in your x-ray room, the arm can be mounted on the left side of the unit.
Programme | Orthophos SL 2D | Orthophos S 2D | Orthophos E |
---|---|---|---|
Standard panorama image |
P1, P2, P10 |
P1, P2, P10 |
P1, P10 |
Image detail left side or right side |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C BW1 |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C BW1 |
P1L, P1R |
Image detail individual quadrants |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C |
- |
Image detail upper or lower jaw |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C, P12 |
P1, P1A, P1C P2, P2A, P2CP10, P10A, P10C, P12 |
- |
Constant magnification |
P1C, P2C, P10C |
P1C, P2C, P10C |
P1C |
Artifact-reduced |
P1A, P2A, P10A |
P1A, P2A, P10A |
P1A |
Thick layer front |
P12 |
P12 |
P12 |
Sinusoidal images |
S1, S3 |
S1, S3 |
S1 |
Multislice in posterior tooth |
- | - | MS1 |
Mandibular joint |
TM1.1, TM1.2, TM3 |
TM1.1, TM1.2, TM3 |
TM1.1, TM1.2 |
Bitewing image |
BW1, BW2 |
BW1, BW2 |
BW1 |
Ceph (optional) |
C1, C2, C3, C3F, C4 |
C1, C2, C3, C3F, C4 |
C1, C2, C3, C3F, C4 |
The requirements follow those for the image processing software, Sidexis 4. Details can be found here: Sidexis 4 system requirements
Yes, the Orthophos E works exclusively with Sidexis 4. Nevertheless, data migration from Sidexis XG to Sidexis 4 is very easy.
The Orthophos SL 2D and the Orthophos S 2D are 3D upgradeable. The Orthophos E does not offer this option.
Whether hardware or software, a variety of imaging solutions are waiting for you in extraoral x-rays.
Performance features |
Orthophos SL 2D | Orthophos S 2D | Orthophos E |
---|---|---|---|
X-ray generator |
60 - 90 kV, 3-16mA | 60 - 90 kV, 3-16mA | 60 - 90 kV, 3-16mA |
Panoramic exposure time |
P1: max 14,2 s P1 Quickshot: max 9,1 s |
P1: max 14,2 s P1 Quickshot: max 9,1 s |
P1: max 14,2 s |
Radiation time Ceph |
Standard 9,4 s Quickshot 4,7 s |
Standard 9,4 s Quickshot 4,7 s |
Standard 9,4 s |
User interface |
EasyPad | EasyPad | MultiPad |
Patient positioning |
automatic (occlusal bite block) |
automatic (occlusal bite block) |
manual |
Panorama technology |
DCS | CsI | CsI |
Autofocus |
yes | yes | - |
Ceph arm (optional) |
left or right | left or right |
left |
Ceph unit with 2 sensors |
yes |
yes |
optional |
Quickshot |
yes |
yes |
- |
Fields of View |
upgradeable | upgradeable |
- |
3D Low Dose |
upgradeable |
upgradeable |
- |
HD mode |
upgradeable |
upgradeable |
- |
Base |
optional |
optional |
optional |
Wheelchair accessible |
yes | yes | yes |
Remote control |
optional |
optional |
optional |
Ambient Light | yes | - | - |
Find out more about the imaging systems from Dentsply Sirona and request information on intraoral imaging, software or 2D and 3D imaging technology.