Calibra Universal | Dentsply Sirona

global site

Do you want to change to Dentsply Sirona ?

Calibra Universal - Self-Adhesive Resin Cement

The Easy, Universal Choice

With a formulation that suits so many types of restorations, it’s no wonder it’s called Calibra Universal Cement. It’s the simple choice for successful results across a wide array of indications.¹

One-step cementation means no additional etchant or adhesive
High immediate 6-minute bond strength for a strong initial bond
5 esthetic shade options with Shade Stable® technology virtually eliminates color shift over time

_{¹ Calibra Universal is intended for cementation of indirect restorations including ceramic, composite and metal-based inlays, onlays crowns, bridges, and posts.}

Robust bonding performance

Get the reliability and predictability of proven immediate and short-term bond strength for long-lasting results.

6 Minute shear bond strength to dentin

Test: Shear Bond Strength to dentin after self-curing for 6 minutes at 37°C.

Source: Dentsply Sirona.

24 hour shear bond strength to dentin

Test: Shear Bond Strength to dentin after self-curing for 24 hours at 37°C.

Source: Dentsply Sirona.

Avoid misdiagnosis

High radiopacity can aid in providing a clear view of the material within the crown.
This helps avoid a misdiagnosis of gaps or voids, which can lead to costly remakes.

Cleanup is a snap

Benefit from the swiftness of tack curing without the stress of over-curing.

Tack cure with confidence: Up to 10-second initiation phase*
More cleanup time: 45-second gel phase

_{*10-second tack cure window equals five-second wave cure per surface. For excess cement cleanup, monowave output LED lights with a single peak output around 470nm are recommended. High power, dual, or broad spectrum lights may cause premature hardening of excess cement. Check curing light effect on mixed cement prior to clinical use.}

The complete solution for CEREC Tessera restorations

The answer to which cement is correct for a certain situation depends largely on the type of restoration and its wall thickness.

Fundamentally all types of CEREC Tessera glass ceramic restoration can be cemented fully adhesively.
Inlays, onlays and partial crowns have to be cemented fully adhesively, that is using Prime&Bond and Calibra Ceram.
Veneers have to be cemented fully adhesively, that is using Prime&Bond and Calibra Veneer.
Anterior and posterior crowns with a wall thickness of approximately 1.5 millimeters or more may also be cemented with a glass ionomer technology based cement, such as Calibra Bio or Calibra Universal.

Recommendation for anterior and posterior crown restorations with a wall thickness > 1.5 mm with CEREC Tessera

Anterior and posterior crowns with a wall thickness of approximately 1.5 millimeters or more may be cemented with a glass ionomer technology based cement, such as Calibra Bio or Calibra Universal.

CEREC Tessera - Advanced Lithium Disilicate

Speed, strength, esthetics—it used to be that you had to pick two.

Today, with an advanced crystal matrix structure—lithium disilicate + virgilite—CEREC Tessera CAD/CAM blocks are optimized to deliver uncompromising performance for all three.

Learn more

Calibra Universal Self-Adhesive Resin Cement

With its wide tack-cure window of up to 10 seconds¹ and an extended 45-second gel-phase, Calibra Universal cement ensures an easy, stress-free cleanup for all CEREC Zirconia+ restorations.

_{¹10-second tack cure window equals five-second wave cure per surface. For excess cement cleanup, monowave output LED lights with a single peak output around 470nm are recommended. High power, dual, or broad spectrum lights may cause premature hardening of excess cement. Check curing light effect on mixed cement prior to clinical use.}

Calibra Bio - Bioceramic Luting Cement

Calibra Bio Bioceramic Luting Cement is a permanent, self-curing, radiopaque, water-based dental luting cement.

The complete solution for CEREC Zirconia+ restorations

Designed to perform better together, Calibra Universal Self-Adhesive Resin Cement is simple and easy to use with CEREC Zirconia+ restorations. There’s no need to prepare enamel or dentin with an etchant or bonding agent—simply apply Calibra Universal to the restoration and it’s ready to seat.

CEREC Zirconia+ Blocks

A high-performance, pre-colored translucent zirconium oxide material with a high degree of flexural strength, CEREC Zirconia+ allows for tooth-conserving preparations for full-contour zirconia restorations.

Calibra Universal Self-Adhesive Resin Cement

With its wide tack-cure window of up to 10 seconds¹ and an extended 45-second gel-phase, Calibra Universal cement ensures an easy, stress-free cleanup for all CEREC Zirconia+ restorations.

Downloads

Calibra Family | Brochure | EN

Calibra Cements - The Simple Choice for Easy Clean Up

Download

Celtra Duo | Brochure | Solution with Prime&Bond active and Calibra Ceram

Celtra Duo (ZLS) blocks, Prime&Bond active adhesive, and Calibra Ceram cement were designed to enhance and strengthen the individual benefits each of them provides, resulting in an easy-to-use system that streamlines the restoration process.

Download