Bereid uw Primeprint voor op 3D-printen
Hieronder vindt u de download voor de inLab CAM 22-software, die nodig is voor het werken met Primeprint. Daarnaast bieden we ook de inLab CAD-software, inLab-apps en CEREC-software. Om de software te gebruiken, heeft u een geldige licentiecode nodig. Neem bij vragen contact op met uw dealer van Dentsply Sirona.
inLab CAM-software, inLab CAD-software en apps
inLab CAM SW 22.3.0 3 GB
inLab CAM SW 22.3 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
inLab CAD SW 22.1.1 1 GB
Please note that in order to run the software you need valid license keys for both the inLab CAD SW 22 as well as for the Basis module. Licenses can be ordered from your Dentsply Sirona Dealer.
inLab CAM SW 22.2.0 2 GB
inLab CAM SW 22.2 requires the inLab CAM SW 22 license. Without an inLab CAM SW 22 license, the Software will start in a demo mode that allows for using and testing the software but will not allow for production. inLab CAM 22.x uses CAM Service as database for all manufacturing data such as designs and blanks. IMPORTANT: inLab CAM 22 will import all *.cam (designs) and *.blc (blanks/jobs) data into the CAM Service database. Once the data is imported, it will no longer be accessible with inLab CAM ≤20.x! Please make sure, that you have the appropriate licenses installed and/or backup your data if you intend to further use the data with inLab CAM ≤20.x!
inLab Model 22.0.3 596 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for both the inLab CAD SW 22 and for the Basis module.
inLab Splint 22.0.3 576 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
inLab Partial Framework 22.0.2 577 MB
Minimum requirement is an installed inLab CAD SW 22.1.x as well as license keys for the inLab CAD SW 22, for the Basis module and for the Removables module.
Updatebeschrijvingen voor inLab
Update Description inLab CAD SW 22.1.1 548 kB
inLab CAM Software 22.2.0 Update Description 382 kB
inLab CAD & CAM SW 22.1.0 Update Description 2 MB
This document describes all changes compared to the previous version inLab CAD 22.0.1 & inLab CAM 22.0.0
inLab CAD & CAM SW 22.0.0 Update description
This document describes changes and improvements compared to previous version inLab CAD 20.0.4 & inLab CAM 20.0.1
CEREC Software
Voor de installatie van de software is een CEREC SW 5.2-licentie vereist.
CEREC SW 5.2.4 1 GB
The update CEREC SW 5.2.4 is also distributed via AutoUpdate.
CEREC SW 5.2.3 4 GB
The update CEREC SW 5.2.3 is also distributed via AutoUpdate.
Updatebeschrijvingen voor CEREC
Update Description CEREC SW 5.2.4 184 kB
Update Description CEREC SW 5.2.4
Update Description CEREC SW 5.2.3 171 kB
Update Description CEREC SW 5.2.3
Connect Software
Hier kunt u de huidige Connect-software downloaden. Deze versie ondersteunt Primescan AC, CEREC Primescan AC, Omnicam AC en CEREC Omnicam AC (Windows 10). Vanwege verschillende goedkeurings- en registratietijden zijn niet alle producten onmiddellijk beschikbaar in alle landen.
Connect SW 5.2.4 2 GB
Connect SW 5.2.4 Update
Connect SW 5.2.3 2 GB
Connect SW 5.2.3 Update
Connect SW 5.2.2 2 GB
Connect SW 5.2.2 Update
Updatebeschrijvingen voor Connect
Connect SW 5.2.4 Update Description 163 kB
Update description for Connect SW 5.2.4
Update Description Connect SW 5.2.3 159 kB
DS-systeemmonitor: sluit uw inLab CAM-software aan op DS Core
DS System Monitor 1.4.1 115 MB
Connect your Connect SW and/or CEREC SW to DS Core
Testcases voor Primeprint-oplossing
inLab CAD SW, test case 1, surgical guide 36 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
inLab CAD SW, test cases 2, 3, 4, models and splint 139 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 1, surgical guide 34 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 2, solid model 78 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 3, working model 34 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case 4, splint 34 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
Primeprint test case shrinkage, 60mm, +-.05mm 18 MB
New superspeed sintering program for Cercon ht/xt. Please download the file and open it. Then follow the contained update description.
